Computational Brain Biomechanics

Shima Jalalian, Ph.D.

Postdoctoral Research Fellow, Thomas Jefferson University
Visiting Scholar, Villanova University

Portrait of Shima Jalalian

About

I am a postdoctoral research fellow in computational biomechanics and neuromechanics. My work builds multiphysics finite-element models that explain how soft biological tissue — above all the brain — changes shape, stiffens, deforms and fails.

My doctoral research asked how to tell healthy aging apart from accelerated aging. I built a multiphysics framework that couples the spread of neurotoxic proteins to local tissue volume loss, running finite-element simulations over anatomically informed brain networks derived from Human Connectome Project diffusion imaging, and calibrated against longitudinal scans from the Alzheimer's Disease Neuroimaging Initiative.

To make deterioration measurable I defined five mechanomarkers — displacement, area stretch, curvature change, cortical thickness and sulcal depth. They trace a clear order to the damage: structural change appears first in temporal and occipital regions before reaching parietal and frontal areas.

My current work moves from observing tissue to intervening in it. I build a coupled Eulerian–Lagrangian framework in Abaqus for the mechanics of deep brain stimulation probe insertion — indentation, puncture and trajectory deviation — in agar brain-tissue phantoms, using hyperelastic and viscoelastic models informed by magnetic resonance elastography and a ductile damage model that captures tissue failure. I work alongside neurosurgeons in the operating room on sensor setup and intraoperative data acquisition during DBS procedures, so the simulations answer to real measurements.

I work across the full arc of a modelling problem — imaging and segmentation, mesh generation, constitutive modelling, large-deformation solvers, and the Python automation that makes a study reproducible rather than a one-off.

Based in
Philadelphia, Pennsylvania
Ph.D. Mechanical Engineering (Biomechanics)
Stevens Institute of Technology, Aug 2019 – Aug 2025 Dissertation: Multiphysics Modeling of Alzheimer's Disease — Weickenmeier Lab
M.Sc. Biomedical Engineering (Biomechanics)
University of Tehran, 2015–2018 Thesis: Computational Modeling of the Cervix to Understand Mechanical Causes of Preterm Birth
B.Sc. Mechanical Engineering (Biomechanics)
Ferdowsi University of Mashhad, 2010–2015
Graduate Certificate
Biomechanical Engineering Stevens Institute of Technology, 2020–2022
Modelling & numerics
Abaqus (Python scripting, UMAT, CEL) · FEBio · COMSOL · ANSYS · nonlinear continuum mechanics · constitutive material modelling · large-deformation analysis · damage and failure modelling · multiphysics coupling
Imaging & meshing
MRI/DTI processing · image registration · image-based mesh generation · FreeSurfer · MRtrix · Mimics · Simpleware · HyperMesh · Gmsh · ParaView
Programming
Python (SciPy, Pandas, Seaborn, Matplotlib) · MATLAB · R · shell scripting

Research

From the mechanics of the aging brain to the mechanics of operating on it.

Overview of the computational framework: proximity- and connectivity-based connectome graphs with adjacency matrices, alongside finite-element meshes of cerebrospinal fluid, grey matter, white matter, the lateral ventricle and an ROI-based grey-matter parcellation
The computational framework. Graph models simulate prion-like spreading of amyloid beta and tau along proximity- and connectivity-based connectomes; the finite-element model resolves cerebrospinal fluid, grey matter, white matter, the ventricles and a region-of-interest parcellation of the cortex. Annals of Biomedical Engineering, 2026.

Current — surgical probe mechanics

Four-step overview: MR elastography measures the gel stiffness; one relation turns stiffness into model strength; a computer model pushes the probe in until the gel fails; the model predicts the puncture force against depth for soft and stiff gels
Postdoctoral

Deep brain stimulation probe insertion in brain-tissue phantoms

A coupled Eulerian–Lagrangian framework in Abaqus for the mechanics of DBS probe insertion into agar brain-tissue phantoms, capturing indentation, puncture and trajectory deviation where deformation is far too large for a purely Lagrangian mesh.

Hyperelastic and viscoelastic constitutive models of the gel are identified from magnetic resonance elastography and experimental data, with a ductile damage model for puncture and failure. Simulation–experiment validation compares reaction force and deformation across insertion speeds and material conditions.

Doctoral — brain aging & neurodegeneration

Cortical surfaces for cognitively normal, mild cognitive impairment and Alzheimer's disease, coloured by displacement, area stretch, mean curvature, cortical thinning and sulcal depth change
Ph.D.

Mechanomarkers of regional deterioration

Five mechanomarkers — displacement, area stretch, curvature change, cortical thickness and sulcal depth — quantify how tissue deteriorates region by region.

Simulated ventricular-volume trajectories and cortical-thickness profiles are validated against clinical observations across cognitively normal, mild cognitive impairment and Alzheimer's disease cohorts.

Annals of Biomedical Engineering, 2026
Cross-section of a brain hemisphere labelling five features of cerebral atrophy: ventricular enlargement, curvature change, sulcal deepening, area stretch and cortical thinning
Ph.D.

Coupling protein pathology to tissue loss

A multiphysics framework that couples the progression of neurotoxic proteins to local tissue volume loss, reproducing the hallmark features of dementia.

Region-specific white- and grey-matter shrinkage rates are calibrated against longitudinal data from the Alzheimer's Disease Neuroimaging Initiative.

Annals of Biomedical Engineering, 2026
Spatiotemporal progression of amyloid beta and tau across the brain network
Ph.D.

Connectome-based spreading of pathology

Diffusion tensor imaging from the Human Connectome Project builds anatomically informed brain networks, over which amyloid-β and tau spread by a Fisher–Kolmogorov reaction–diffusion process.

The model resolves amyloid-β-driven atrophy preceding tau-mediated degeneration by up to 12.5 years, and shows how network architecture shapes where protein accumulates.

Annals of Biomedical Engineering, 2026
Baseline brain MRI at age 70 and follow-up at age 75, with the nonlinear registration between them shown as a displacement vector field on the cortical surface and the ventricles
Ph.D.

Longitudinal MR image registration

Linear and nonlinear registration in FSL produces deformation fields mapping the MNI template onto each baseline scan, and each baseline onto its five-year follow-up.

Those fields are interpolated onto the computational mesh, giving nodal displacements that correspond directly to the finite-element nodes — so measured anatomy drives the model.

Annals of Biomedical Engineering, 2026

Earlier — tissue and device mechanics

Von Mises stress distribution on stainless-steel 304 and magnesium AZ31 stents at maximum expansion, for calcified, hypocellular and hypercellular plaques
M.Sc.

Stent material and arterial response

Comparing biodegradable magnesium-alloy and permanent stainless-steel coronary stents by finite-element analysis — deployment behaviour, stress distribution, vessel response and restenosis likelihood.

Amirkabir J. Mech. Eng., 2020
Finite-element effective stress contour on the cervix, showing a stress concentration near the internal os
M.Sc. thesis

Uterine and cervical mechanics in preterm birth

A patient-specific three-dimensional model showing how cervical softening and altered amniotic-sac geometry raise cervical stress, contributing to cervical insufficiency and premature delivery.

M.Sc.

Bone remodelling around orthopaedic screws

A finite-element study of how screw design governs stress shielding and loosening, with parameters that quantify screw–bone load sharing and identify design changes that reduce loosening risk.

Publications

Journal articles

  1. 2026
    A Coupled Eulerian–Lagrangian Framework for Modeling Deep Brain Stimulation Probe Insertion in MRE-Characterized Brain Tissue Phantoms
    Jalalian, S., et al.
    In preparation
  2. 2026
    Alzheimer's Disease Accelerates Cerebral Atrophy by Over a Decade Compared to Healthy Aging
    Jalalian, S., & Weickenmeier, J.
    Annals of Biomedical Engineering, 54

    Simulations predict that Alzheimer's disease accelerates cerebral atrophy by roughly twelve years relative to normal aging, with the earliest divergence in medial temporal and occipital regions. The paper introduces mechanomarkers — cortical thickness, displacement, curvature, sulcal depth and area stretch — to quantify disease-specific deformation and locate regions of early vulnerability.

  3. 2021
    Brain aging mechanisms with mechanical manifestations
    Blinkouskaya, Y., Cacoilo, A., Gollamudi, T., Jalalian, S., & Weickenmeier, J.
    Mechanisms of Ageing and Development, 200, 111575
  4. 2020
    A Patient-Specific Study to Investigate Mechanical Functions of the Uterus and Cervix on Preterm Birth in a Pregnant Woman
    Jalalian, S., & Vahidi, B.
    Studies in Medical Sciences
  5. 2020
    Numerical Analysis of a Stented Coronary Artery: Investigating Function of Two Stents with Magnesium and Stainless-Steel Materials
    Taghizadeh, Y., Vahidi, B., Akbari, B., & Jalalian Sedaghati, S.
    Amirkabir Journal of Mechanical Engineering, 52(4), 267–270
    DOI

Conference presentations

  1. 2023
    Exploring the multiphysics of the brain during aging, and in neurological diseases
    Jalalian, S., & Weickenmeier, J.
    SIAM-NNP Annual Meeting, New York–New Jersey–Pennsylvania · 21–22 October
  2. 2022
    Network-Based Modeling of Alzheimer's Disease: Assessing Impact of Connectome Measures on Progression Patterns
    Jalalian, S., & Weickenmeier, J.
    SB3C, Hyatt Regency Chesapeake Bay Resort, Maryland · 20–23 June · Podium
  3. 2021
    Protein Spreading Patterns in Alzheimer's Disease: Exploring Connectivity-based and Proximity-based Connectome Models
    Jalalian, S., & Weickenmeier, J.
    SB3C Virtual · 14–18 June · Podium
  4. 2021
    It Takes Both: Protein Interactions of Neurofibrillary Tangles and Amyloid-Beta Plaques in Alzheimer's Disease
    Gollamudi, T., Jalalian, S., & Weickenmeier, J.
    SB3C Virtual · 14–18 June · Poster
  5. 2019
    An Imaging-based 3-D Simulation of the Cervix and the Uterus to Investigate the Mechanical Function of the Cervix in a Pregnant Woman
    Jalalian, S., & Vahidi, B.
    27th Annual International Conference of the Iranian Society of Mechanical Engineering, Tehran · 30 April–3 May · Podium
  6. 2017
    Investigation of Cervix Mechanical Function in a Pregnant Woman to Understand Preterm Birth Development: A Functional Tissue Engineering Study
    Jalalian, S., & Vahidi, B.
    Royan International Twin Congress, Tehran · 30 August–1 September · Poster

Experience

  1. Postdoctoral Research Fellow & Visiting Scholar
    September 2025 – present · Philadelphia, PA
    Wu Lab, Department of Neurosurgery, Sidney Kimmel Medical College, Thomas Jefferson University
    Department of Mechanical Engineering, Villanova University

    Develop the coupled Eulerian–Lagrangian insertion model and calibrate its constitutive behaviour from elastography and experimental data, run the simulation–experiment validation across insertion speeds and material conditions, and collect intraoperative data alongside neurosurgeons during DBS procedures.

  2. Graduate Research Assistant & Teaching Assistant
    Weickenmeier Lab, Stevens Institute of Technology · 2019–2025

    Built a multiphysics framework using Abaqus UMAT and Python ODE solvers coupling toxic protein diffusion to a nonlinear model of tissue atrophy. Automated a pipeline over 100+ Human Connectome Project participants, and wrote post-processing tools extracting morphometry and mechanical markers across hundreds of simulations.

    Mentored 15+ undergraduate and graduate students in FEA, scripting and scientific visualisation, with mentees taking two consecutive first-place departmental research awards. Teaching assistant for Advanced Mechanics of Solids; designed Python coding workshops for Biomechanics of the Brain.

  3. Peer review
    Journals and conferences · 2019–2024

    Reviewed manuscripts for the Journal of Biomechanics (2024) and PeerJ (2023), and conference abstracts for the 27th Annual Conference of the Iranian Society of Mechanical Engineering (2019).

  4. Design & Development Engineer
    V.Med Production Group, Mashhad · 2017–2018

    Designed a 16-cavity plastic injection mould for 50 cc syringes, the form-and-seal packaging for a 20 cc vacuum syringe, and numerous machine parts, under ISO 9001:2015, ISO 13485:2016 and ISO 14971:2007.

  5. Biomedical Engineering Intern
    Ghaem University Hospital · June–September 2013

    Repaired and calibrated critical-care medical equipment, including ventilators and incubators, keeping the devices reliable and in service on the wards.

  6. Physics Instructor
    National Organization for Development of Exceptional Talents (Sampad) · 2010–2011

    Taught physics to 40+ pre-college students preparing for the national university entrance examination, and mentored them on choosing a course of study.

Contact

Open to collaboration in computational biomechanics, neuromechanics and soft-tissue modelling.

The quickest way to reach me is by email. I am happy to discuss collaborations, share methodological detail from any of the projects above, or talk about applying these models to new tissue and device problems.